Details
Assembled Roving For Chopped Strands
Assembled Roving for Chopped Strands is coated with a special silane-based sizing compatible with unsaturated polyester and vinyl ester resins. It is designed for use in Chopped Strands Mat and Stitch Combo Mat production applications.
Product Feature
● Excellent choppability and dispersion● Good static control and fast wet-out in resins
● Low static, fast wet-out and good dispersion
Specification
Glass Type
ECR
Sizing Type
Silane
Linear Density (Tex)
2400
Filament Diameter (μm)
13
Technical Paramenters
Linear density variatio(%) |
Moisture content(%) |
Loss on ignition(%) |
Tensile strength(N/tex) |
ISO1889
|
ISO3344
|
ISO1887
|
ISO3341
|
±5 |
≤0.10 |
1.00±0.15 |
120±20 |
Applications
Assembled rovings are chopped to a specified length,and then fall onto a conveyor randomly. The chopped strands are stitched knitting or bonded together by either an emulsion binder or a powder binder. After drying, cooling and winding, a chopped stand mat is formed. Mainly used in the manufacture of FRP hulls, sanitary ware, car shells, profiles, etc.
Chopped Stand Mat Production Process
Packing Method
Average Coil Weigt—18Kg Inner coil diameter—80 mm Outer coil diameter—270 mm Bay height - 260 mm
|
|
Number of coils in a layer — 12 Number of layers — 3 or 4 Net weight of the pallet is about 864 kg or 1125 kg Pallet dimensions — 112 x 112 x 95 cm or 112 x 112 x 12 cm (L x W x H) |
|
Storage
The fiberglass products should be stored away from heat and moisture, and in their original packaging. The best conditions are: temperatures between -10 ºC and 35 ºC; humidity between 35 and 65 %. If the product is not stored under these specifications, it is advisable to condition it in the workshop for at least 24 hours before use, to prevent condensation.
To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.